Partager l'article ! How To Clean A Clogged Washer Drain Hose: 1 Unplug the washer and put the plug on prime with the machine to keep it out of any spilled ...
Unplug the washer and put the plug on prime with the machine to keep it out of any spilled water.2
Take any wet clothes out from the washer and bail the water out in the drum together with the bucketHow to Clean a Clogged Washer Drain Hose. The washer may be too heavy to move if it's full of water and wet clothing.3
Pull the washer out from the wall enough for you to get behind it.4
Remove the plate from the back from the washer by taking out Best Washing Machine all the screws. Different brands and models of washers vary in how many screws hold on the back plate, and not Fix Washing Machine Problems all models require removing the plate to get for the pump exactly where the hose is attached.5
Locate the drain hoseHow to Clean a Clogged Washer Drain Hose. In the three hoses coming out with the back with the washer, the drain hose is the largest in diameter and is attached to a drain pipe instead of a faucet.6
Check the drain hose for kinks and bends. These are often the cause of a blocked or slow-running drain hose.7
Remove the drain hose from the washer by detaching it from the drain pump. You will need a screwdriver or a slide-lock wrench to open the clasp that holds the hose for the pump, depending on what type of clasp it is.8
Keep the bucket nearby to catch any water that comes out in the drain pump when you take away the hose.9
Remove the other end of the house from the pipe it drains into.10
Bend the clothes hanger open so you can use it to poke inside the hose. Push or pull out the materials that's causing the blockage.11
Replace the hose and run the washer to check if it's clear.
How To Clean A Clogged Washer Drain Hose